Fastener Length
Tensile Strength
Minimum Thread Length
Head Height
Head Style
Material Quality Standards
Neck Type
Head Width
Bolt Material
Dimensional Standards
Material Grade/Class
Finish
Thread Type
Made in North America
Pack Size
Neck Width
Overall Length
System of Measurement
Head Angle
Thread Direction
Thread Style
Thread Size
Standards
Clear Filters
Grade 5 Steel Dome Head Square Neck Plow Bolts
Grade 5 Steel Dome Head Square Neck Plow Bolts $3.59 – $81.06
Back to products
Grade 5 Steel Hex Head Cap Screws
Grade 5 Steel Hex Head Cap Screws $1.14 – $327.00

Grade 5 Steel Flat Head Square Neck Plow Bolts

SKU: N/A

$1.08 – $94.37

0 People watching this product now!
Fastener Length
Tensile Strength
Minimum Thread Length
Head Height
Head Style
Material Quality Standards
Neck Type
Head Width
Bolt Material
Dimensional Standards
Material Grade/Class
Finish
Thread Type
Made in North America
Pack Size
Neck Width
Overall Length
System of Measurement
Head Angle
Thread Direction
Thread Style
Thread Size
Standards
2-1/4 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
2-1/4 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.20
41TU04
instock
Fastener Length : 2-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3-1/2 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
29/64 in
3-1/2 in
Inch
80 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.70
1CFE9
instock
Fastener Length : 3-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 29/64 in, Overall Length: 3-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
2 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.45
41TT91
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
1-1/2 in
Inch
82 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.22
41TU01
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
2 in
Inch
82 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.70
41TU03
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-3/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
2-3/4 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.85
41TT94
instock
Fastener Length : 2-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 2-3/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
1-3/4 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.51
1CFH2
instock
Fastener Length : 1-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
3 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
25/64 in
3 in
Inch
80 °
Right Hand
Fully Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$5.15
1CFE1
instock
Fastener Length : 3 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 25/64 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
2-3/4 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
2-3/4 in
Inch
80 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$8.19
1CFJ8
instock
Fastener Length : 2-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 2-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
3/8 in
2 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.61
1CFD7
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
1 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
Square
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
3/8 in
1 in
Inch
82 °
Right Hand
Fully Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.70
41TU12
instock
Fastener Length : 1 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
3 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
1/2 in
3 in
Inch
80 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$5.08
1CFF7
instock
Fastener Length : 3 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
1-1/2 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.72
1CFH1
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1-1/2 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
1/2 in
1-1/2 in
Inch
80 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.82
1CFF1
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-1/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
1-1/4 in
Inch
82 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.82
41TT88
instock
Fastener Length : 1-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 1-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1 in
120,000 psi
1 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
1 in
Inch
82 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.04
41TT87
instock
Fastener Length : 1 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 1 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
2-1/4 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
25/64 in
2-1/4 in
Inch
80 °
Right Hand
Fully Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.25
1CFD8
instock
Fastener Length : 2-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 25/64 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1-1/2 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
1-1/2 in
Inch
80 °
Right Hand
Fully Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.78
1CFJ3
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
1-1/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
1/2 in
1-1/4 in
Inch
82 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$1.82
41TU23
instock
Fastener Length : 1-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 1-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
2-1/4 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
7/16 in
2-1/4 in
Inch
82 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.13
41TU20
instock
Fastener Length : 2-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
7/16 in
2 in
Inch
82 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.70
41TU19
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
7/16 in
1-3/4 in
Inch
82 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.70
41TU18
instock
Fastener Length : 1-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
1-1/4 in
120,000 psi
1-1/4 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
7/16 in
1-1/4 in
Inch
82 °
Right Hand
Fully Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$1.08
41TU16
instock
Fastener Length : 1-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 1-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
3-1/2 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
3-1/2 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.75
41TU09
instock
Fastener Length : 3-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 3-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
120,000 psi
1-3/4 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
1-3/4 in
Inch
82 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.58
41TU02
instock
Fastener Length : 1-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-3/4 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
4-1/2 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
4-1/2 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$41.54
41TT99
instock
Fastener Length : 4-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 4-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
3-1/2 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
3-1/2 in
Inch
82 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.44
41TT85
instock
Fastener Length : 3-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 3-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
1 in
120,000 psi
1 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
1 in
Inch
82 °
Right Hand
Fully Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.75
41TT82
instock
Fastener Length : 1 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 1 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2-3/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
33/64 in
2-3/4 in
Inch
80 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.45
1CFF6
instock
Fastener Length : 2-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 33/64 in, Overall Length: 2-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
Square
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
3/8 in
1-3/4 in
Inch
82 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.18
41TU14
instock
Fastener Length : 1-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
2-1/2 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.34
41TT93
instock
Fastener Length : 2-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
4-1/2 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
4-1/2 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$5.81
41TU11
instock
Fastener Length : 4-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 4-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
4 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
4 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.99
41TU10
instock
Fastener Length : 4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
4 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$6.73
41TT98
instock
Fastener Length : 4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
4 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
4 in
Inch
80 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.68
1CFK2
instock
Fastener Length : 4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
4 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
4 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$9.69
1CFH9
instock
Fastener Length : 4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Bulk Pack
33/64 in
4 in
Inch
80 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$94.37
4RVZ4
instock
Fastener Length : 4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Bulk Pack, Neck Width: 33/64 in, Overall Length: 4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
33/64 in
4 in
Inch
80 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.01
1CFF9
instock
Fastener Length : 4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 33/64 in, Overall Length: 4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
3-1/2 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
3-1/2 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$5.98
41TT97
instock
Fastener Length : 3-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 3-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
3-1/2 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
1/2 in
3-1/2 in
Inch
80 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$7.20
1CFF8
instock
Fastener Length : 3-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 3-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
3-1/4 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
3-1/4 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$10.49
41TU08
instock
Fastener Length : 3-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 3-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3-1/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
3-1/4 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$28.25
41TT96
instock
Fastener Length : 3-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 3-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
3 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
3 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.79
41TU07
instock
Fastener Length : 3 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
3 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
3 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$5.05
41TT95
instock
Fastener Length : 3 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
3 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
7/16 in
3 in
Inch
82 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.32
41TU22
instock
Fastener Length : 3 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
3 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
3 in
Inch
82 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.97
41TT84
instock
Fastener Length : 3 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
3 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
3 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$6.49
1CFH7
instock
Fastener Length : 3 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 3 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
2-3/4 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
2-3/4 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.54
41TU06
instock
Fastener Length : 2-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 2-3/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-3/4 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
2-3/4 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$5.71
1CFH6
instock
Fastener Length : 2-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 2-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
2-3/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Bulk Pack
33/64 in
2-3/4 in
Inch
80 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$89.28
4RVZ2
instock
Fastener Length : 2-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Bulk Pack, Neck Width: 33/64 in, Overall Length: 2-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
5/8 in
2-1/2 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.03
41TU26
instock
Fastener Length : 2-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
5/8 in
2-1/2 in
Inch
82 °
Right Hand
Partially Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.55
41TU05
instock
Fastener Length : 2-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
33/64 in
2-1/2 in
Inch
80 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.96
1CFP6
instock
Fastener Length : 2-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 33/64 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
7/16 in
2-1/2 in
Inch
82 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.66
41TU21
instock
Fastener Length : 2-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
2-1/2 in
Inch
80 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$8.32
1CFJ7
instock
Fastener Length : 2-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2-1/2 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
Square
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
3/8 in
2-1/2 in
Inch
82 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.89
41TU15
instock
Fastener Length : 2-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 2-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
2-1/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
2-1/4 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.96
41TT92
instock
Fastener Length : 2-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
2-1/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
1/2 in
2-1/4 in
Inch
80 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.21
1CFF4
instock
Fastener Length : 2-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
2-1/4 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
2-1/4 in
Inch
80 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$7.67
1CFJ6
instock
Fastener Length : 2-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2-1/4 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
2-1/4 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.77
1CFH4
instock
Fastener Length : 2-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 2-1/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
1/2 in
2 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.77
1CFF3
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
2 in
Inch
80 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$6.40
1CFJ5
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
2 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.27
1CFH3
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
2 in
120,000 psi
2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
5/8 in
2 in
Inch
82 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.97
41TU25
instock
Fastener Length : 2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
1-3/4 in
Inch
82 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.48
41TT90
instock
Fastener Length : 1-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
120,000 psi
1-1/4 in
27/64 in
Countersunk
SAE J429
1/2 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
1/2 in
1-3/4 in
Inch
80 °
Right Hand
Partially Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.08
1CFF2
instock
Fastener Length : 1-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-3/4 in
120,000 psi
1-1/8 in
23/64 in
Countersunk
SAE J429
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
1-3/4 in
Inch
80 °
Right Hand
Partially Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$6.10
1CFJ4
instock
Fastener Length : 1-3/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/8 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 1-3/4 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
25/64 in
1-1/2 in
Inch
80 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$7.55
1CFN8
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 25/64 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 80 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
Square
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
3/8 in
1-1/2 in
Inch
82 °
Right Hand
Partially Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.89
1CFD6
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Partially Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1-1/2 in
1/2 in
Countersunk
SAE J429
Square
5/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
5/8 in
1-1/2 in
Inch
82 °
Right Hand
Fully Threaded
5/8"-11
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.61
41TU24
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 1/2 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 5/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 5/8 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 5/8"-11, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1-1/2 in
27/64 in
Countersunk
SAE J429
Square
1/2 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
1/2 in
1-1/2 in
Inch
82 °
Right Hand
Fully Threaded
1/2"-13
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.82
41TT89
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 27/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 1/2 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 1/2 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 1/2"-13, Standards: ASME B18.9 SAE J429
Add to cart
1-1/2 in
120,000 psi
1-1/2 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
7/16 in
1-1/2 in
Inch
82 °
Right Hand
Fully Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.38
41TU17
instock
Fastener Length : 1-1/2 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/2 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 1-1/2 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
1-1/4 in
120,000 psi
1-1/4 in
23/64 in
Countersunk
SAE J429
Square
7/16 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
7/16 in
1-1/4 in
Inch
82 °
Right Hand
Fully Threaded
7/16"-14
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$4.64
41TT83
instock
Fastener Length : 1-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 23/64 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 7/16 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 7/16 in, Overall Length: 1-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 7/16"-14, Standards: ASME B18.9 SAE J429
Add to cart
1-1/4 in
120,000 psi
1-1/4 in
5/16 in
Countersunk
SAE J429
Square
3/8 in
Steel
ASME B18.9
Grade 5
Zinc Plated
Coarse
No
Small Pack
3/8 in
1-1/4 in
Inch
82 °
Right Hand
Fully Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.45
41TU13
instock
Fastener Length : 1-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Zinc Plated, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
1-1/4 in
120,000 psi
1-1/4 in
5/16 in
Countersunk
SAE J429
Square
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
1-1/4 in
Inch
82 °
Right Hand
Fully Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$3.15
41TT79
instock
Fastener Length : 1-1/4 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1-1/4 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1-1/4 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart
1 in
120,000 psi
1 in
5/16 in
Countersunk
SAE J429
Square
3/8 in
Steel
ASME B18.9
Grade 5
Black Oxide
Coarse
No
Small Pack
3/8 in
1 in
Inch
82 °
Right Hand
Fully Threaded
3/8"-16
ASME B18.9 SAE J429
Grade 5 Steel Flat Head Square Neck Plow Bolts
$2.70
41TT78
instock
Fastener Length : 1 in, Tensile Strength: 120,000 psi, Minimum Thread Length: 1 in, Head Height: 5/16 in, Head Style: Countersunk, Material Quality Standards: SAE J429, Neck Type: Square, Head Width: 3/8 in, Bolt Material: Steel, Dimensional Standards: ASME B18.9, Material Grade/Class: Grade 5, Finish: Black Oxide, Thread Type: Coarse, Made in North America: No, Pack Size: Small Pack, Neck Width: 3/8 in, Overall Length: 1 in, System of Measurement: Inch, Head Angle: 82 °, Thread Direction: Right Hand, Thread Style: Fully Threaded, Thread Size: 3/8"-16, Standards: ASME B18.9 SAE J429
Add to cart