Head Width
Neck Width
Pack Size
Minimum Thread Length
Head Height
Material Grade/Class
Bolt Material
Finish
Fastener Length
Made in North America
Tensile Strength
Neck Height
Dimensional Standards
System of Measurement
Thread Style
Thread Type
Thread Direction
Neck Type
Thread Size
Standards
Clear Filters
Class 10.9 Structural Bolts
Class 10.9 Structural Bolts $24.07 – $309.11
Back to products
Class 8.8 Steel Hex Head Cap Screws
Class 8.8 Steel Hex Head Cap Screws $1.47 – $523.68

Class 4.6 Steel Square Neck Carriage Bolts

SKU: N/A

$3.50 – $21.08

0 People watching this product now!
Head Width
Neck Width
Pack Size
Minimum Thread Length
Head Height
Material Grade/Class
Bolt Material
Finish
Fastener Length
Made in North America
Tensile Strength
Neck Height
Dimensional Standards
System of Measurement
Thread Style
Thread Type
Thread Direction
Neck Type
Thread Size
Standards
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
90 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.32
54FL58
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 90 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
20 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$4.19
54FL37
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 20 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
120 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.33
54FL97
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 120 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
40 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$7.06
54FL50
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 40 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
50 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$7.66
54FL52
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 50 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
37.2 mm
16.7 mm
Small Pack
38 mm
8.95 mm
Class 4.6
Steel
Zinc Plated
80 mm
No
58,000 psi
12.9 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M16-2.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$9.10
54FM21
instock
Head Width: 37.2 mm, Neck Width: 16.7 mm, Pack Size: Small Pack, Minimum Thread Length: 38 mm, Head Height: 8.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 80 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 12.9 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M16-2.00, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
40 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.12
54FL66
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 40 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
30 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$16.59
54FL84
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 30 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
49 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
400 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.94
54FM18
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 49 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 400 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
49 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
300 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$15.67
54FM17
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 49 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 300 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
49 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
240 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.62
54FM16
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 49 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 240 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
32 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
200 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$17.76
54FM01
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 32 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 200 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
36 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
180 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$10.65
54FM15
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 36 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 180 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
36 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
170 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.05
54FM14
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 36 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 170 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
28 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
160 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$7.64
54FL81
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 28 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 160 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
36 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
150 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$21.08
54FM13
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 36 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 150 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
32 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
150 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$15.76
54FL99
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 32 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 150 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
28 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
150 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$8.24
54FL80
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 28 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 150 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
37.2 mm
16.7 mm
Small Pack
44 mm
8.95 mm
Class 4.6
Steel
Zinc Plated
140 mm
No
58,000 psi
12.9 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M16-2.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$16.72
54FM23
instock
Head Width: 37.2 mm, Neck Width: 16.7 mm, Pack Size: Small Pack, Minimum Thread Length: 44 mm, Head Height: 8.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 140 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 12.9 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M16-2.00, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
32 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
130 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$10.98
54FL98
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 32 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 130 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
28 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
130 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.50
54FL79
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 28 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 130 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
120 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.40
54FL78
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 120 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
110 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$17.79
54FM12
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 110 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
110 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$10.98
54FL96
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 110 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
110 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$10.37
54FL77
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 110 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
110 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$14.87
54FL60
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 110 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
37.2 mm
16.7 mm
Small Pack
38 mm
8.95 mm
Class 4.6
Steel
Zinc Plated
100 mm
No
58,000 psi
12.9 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M16-2.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.74
54FM22
instock
Head Width: 37.2 mm, Neck Width: 16.7 mm, Pack Size: Small Pack, Minimum Thread Length: 38 mm, Head Height: 8.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 100 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 12.9 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M16-2.00, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
100 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$14.35
54FM11
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 100 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
100 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$18.14
54FL95
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 100 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
100 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.29
54FL76
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 100 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
100 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.97
54FL59
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 100 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
90 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$14.81
54FM10
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 90 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
90 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$9.92
54FL75
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 90 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
80 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$13.50
54FM09
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 80 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
80 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$16.24
54FL94
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 80 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
80 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$14.51
54FL74
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 80 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
80 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$10.02
54FL57
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 80 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
80 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$13.48
54FL44
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 80 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
75 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.02
54FM08
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 75 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
75 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$13.50
54FL93
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 75 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
75 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$18.57
54FL73
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 75 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
75 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$9.43
54FL56
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 75 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
37.2 mm
16.7 mm
Small Pack
38 mm
8.95 mm
Class 4.6
Steel
Zinc Plated
70 mm
No
58,000 psi
12.9 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M16-2.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$7.62
54FM20
instock
Head Width: 37.2 mm, Neck Width: 16.7 mm, Pack Size: Small Pack, Minimum Thread Length: 38 mm, Head Height: 8.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 70 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 12.9 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M16-2.00, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
70 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.79
54FM07
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 70 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
70 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.73
54FL92
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 70 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
70 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.31
54FL72
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 70 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
70 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$8.29
54FL55
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 70 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
65 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.76
54FM06
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 65 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
65 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.02
54FL91
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 65 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
65 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$19.78
54FL71
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 65 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
37.2 mm
16.7 mm
Small Pack
38 mm
8.95 mm
Class 4.6
Steel
Zinc Plated
60 mm
No
58,000 psi
12.9 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M16-2.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$17.57
54FM19
instock
Head Width: 37.2 mm, Neck Width: 16.7 mm, Pack Size: Small Pack, Minimum Thread Length: 38 mm, Head Height: 8.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 60 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 12.9 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M16-2.00, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
60 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$18.05
54FM05
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 60 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
60 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$13.39
54FL90
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 60 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
60 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$16.48
54FL70
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 60 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
60 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$7.63
54FL54
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 60 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
55 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$14.39
54FL89
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 55 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
55 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$15.95
54FL69
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 55 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
55 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$9.50
54FL53
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 55 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
50 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$18.14
54FM04
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 50 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
50 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.34
54FL88
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 50 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
50 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$13.47
54FL68
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 50 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
50 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$6.37
54FL43
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 50 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
45 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$13.50
54FL87
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 45 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
45 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$11.47
54FL67
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 45 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
45 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$6.50
54FL51
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 45 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
45 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$6.39
54FL42
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 45 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
40 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$19.20
54FM03
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 40 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
40 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$9.85
54FL86
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 40 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
40 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$5.65
54FL41
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 40 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
26 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
35 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$10.21
54FL85
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 26 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 35 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
35 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$12.67
54FL65
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 35 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
35 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$7.03
54FL49
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 35 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
35 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$3.87
54FL40
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 35 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
29.35 mm
12.7 mm
Small Pack
30 mm
6.95 mm
Class 4.6
Steel
Zinc Plated
30 mm
No
58,000 psi
8.75 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M12-1.75
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$16.86
54FM02
instock
Head Width: 29.35 mm, Neck Width: 12.7 mm, Pack Size: Small Pack, Minimum Thread Length: 30 mm, Head Height: 6.95 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 30 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 8.75 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M12-1.75, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
30 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$10.79
54FL64
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 30 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
30 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$6.61
54FL48
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 30 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
30 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$4.52
54FL39
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 30 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
25 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
25 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$16.12
54FL83
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 25 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 25 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
22 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
25 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$9.57
54FL63
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 22 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 25 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
25 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$5.65
54FL47
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 25 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
25 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$3.50
54FL38
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 25 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart
23.35 mm
10.58 mm
Small Pack
20 mm
5.38 mm
Class 4.6
Steel
Zinc Plated
20 mm
No
58,000 psi
6.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M10-1.50
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$13.87
54FL82
instock
Head Width: 23.35 mm, Neck Width: 10.58 mm, Pack Size: Small Pack, Minimum Thread Length: 20 mm, Head Height: 5.38 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 20 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 6.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M10-1.50, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
20 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
20 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$9.95
54FL62
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 20 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 20 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
18 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
20 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$6.34
54FL46
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 18 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 20 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
19.35 mm
8.58 mm
Small Pack
16 mm
4.88 mm
Class 4.6
Steel
Zinc Plated
16 mm
No
58,000 psi
5.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M8-1.25
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$8.29
54FL61
instock
Head Width: 19.35 mm, Neck Width: 8.58 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 4.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 16 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 5.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M8-1.25, Standards: DIN 603
Add to cart
15.45 mm
6.48 mm
Small Pack
16 mm
3.88 mm
Class 4.6
Steel
Zinc Plated
16 mm
No
58,000 psi
4.6 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M6-1.00
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$6.00
54FL45
instock
Head Width: 15.45 mm, Neck Width: 6.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.88 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 16 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.6 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M6-1.00, Standards: DIN 603
Add to cart
12.45 mm
5.48 mm
Small Pack
16 mm
3.3 mm
Class 4.6
Steel
Zinc Plated
16 mm
No
58,000 psi
4.1 mm
DIN 603
Metric
Partially Threaded
Coarse
Right Hand
Square
M5-0.80
DIN 603
Class 4.6 Steel Square Neck Carriage Bolts
$3.96
54FL36
instock
Head Width: 12.45 mm, Neck Width: 5.48 mm, Pack Size: Small Pack, Minimum Thread Length: 16 mm, Head Height: 3.3 mm, Material Grade/Class: Class 4.6, Bolt Material: Steel, Finish: Zinc Plated, Fastener Length : 16 mm, Made in North America: No, Tensile Strength: 58,000 psi, Neck Height: 4.1 mm, Dimensional Standards: DIN 603, System of Measurement: Metric, Thread Style: Partially Threaded, Thread Type: Coarse, Thread Direction: Right Hand, Neck Type: Square, Thread Size: M5-0.80, Standards: DIN 603
Add to cart